Durston Manufacturing Co HCT1050 Half Cut Torx Driver Set - 10 Piece

Durston Manufacturing Co HCT1050 Half Cut Torx Driver Set - 10 Piece Review

Durston Manufacturing Co HCT1050 Half Cut Torx Driver Set - 10 Piece Feature

• Knurled body for fingertip control
• Fits into the fastener and makes the feeling better with less wiggle or wobble
• Limited Lifetime Warranty

Durston Manufacturing Co Half Cut Torx Driver Set is designed to set into the fasteners and engages into the larger radius of tool. It fits into the fastener and makes the feeling better with less wiggle or wobble. This set is the strongest hardest bit drivers available and has a knurled body for fingertip control. It is backed by a limited life warranty.

Powermatic 1791100 Model 13 6-Inch 1-1/2 Horsepower Edge Sander, 115/230-Volt 1 Phase

Powermatic 1791100 Model 13 6-Inch 1-1/2 Horsepower Edge Sander, 115/230-Volt 1 Phase Review

Powermatic 1791100 Model 13 6-Inch 1-1/2 Horsepower Edge Sander, 115/230-Volt 1 Phase Feature

• 1-1/2 horsepower, single-phase 115/230-volt motor
• Belt size 6 by 89 inches; 4-inch dust collection shroud
• 10- by 29-1/2-inch cast-iron table
• Includes miter gauge and fence
• 50 by 21-1/2 by 43 inches (L by W by H); weighs 245 pounds; 1-year warranty

Rugged and dependable, this 6-inch edge sander is equipped with a sturdy 1-1/2-horsepower motor that spins the belt at 3,900 surface feet per minute for smoothing out larger workpieces quickly. A large, main table supports bigger material, while a stable end-table provides support for tricky contour sanding operations. The sander features a 6- by 89-inch sanding belt for handling longer workpieces. A 29-1/2- by 10-inch table offers plenty of support for larger stock. And, the sander’s cast iron table raises, lowers, and sets at an angle while the sanding bed tilts from 0 to 90 degrees for controlled sanding of a wide variety of workpieces. More great features include a handy miter gauge makes angled sanding operations a breeze; an integral 4-inch dust collection shroud means cleaner workpieces and healthier lungs; an easy-to-reach tracking mechanism that keeps material moving straight through the sander for cleaner edges; and a cast-iron platen for optimal durability. -- Brian Olson

What’s in the Box
Sander, miter gauge, fence

Spindle Gouge, Midi, 1/2"

Spindle Gouge, Midi, 1/2" Review

Spindle Gouge, Midi, 1/2" Feature

• High speed steel resists "blued" softening from overheating
• Sharpened edge lasts 6 times longer than carbon steel
• Overall length 13"
• Blade length approximately 4"

This 1/2 spindle gouge with an overall length of 13" and a blade length of approximately 4" from Sorby is just the right size to easily grip, yet small enough to be maneuverable. The perfect sized tools for midi and mini lathes.

Techniks 08332-16.0 ER 32 Sealed Coolant Collet Size 16.0mm

Techniks 08332-16.0 ER 32 Sealed Coolant Collet Size 16.0mm Review

Techniks 08332-16.0 ER 32 Sealed Coolant Collet Size 16.0mm Feature

• Reduced T. I. R. (tool runout)
• Increase in Holding Power
• Extended Tool Life with Fewer Tool Changes
• Reduction in Spindle Bearing Wear
• Each Techniks Tool is Individually Lab Certified for Accuracy and Balance

ER32 Sealed Coolant, size 16.0mm

Pinnacle Cryogenic Roughing Gouge 3/4"

Pinnacle Cryogenic Roughing Gouge 3/4" Review

Pinnacle Cryogenic Roughing Gouge 3/4" Feature

• Sub-zero cryogenically treated blade
• Manufactured in Sheffield, England
• European ash handle
• Woodcraft exclusive design
• Overall tool length 17" to 23"

Whether you are a professional production turner or a hobbyist with limited shop time, these cryogenically treated tools stay sharp two to three times longer than standard M-2 high-speed steel tools so you are turning more and sharpening less! Manufactured in Sheffield exclusively for Woodcraft, these cryogenically treated turning tools offer many of the characteristics of powdered metal tools without the cost of powdered metal tools. The cryogenic treatment process uses sub-zero temperatures, down to -300 degrees F, to modify the micro-structure of the steel into a more uniform grain structure that allows you to hone to a fine edge without chipping. Also, your cutting edge is more durable and more resistant to wear. Each tool is mounted in a European ash handle. Overall tool lengths range from 17" to 23".

Techniks 1120.0600 DNA 20 6mm - 5mm Collet

Techniks 1120.0600 DNA 20 6mm - 5mm Collet Review

Techniks 1120.0600 DNA 20 6mm - 5mm Collet Feature

• Reduced T. I. R. (tool runout)
• Increase in Holding Power
• Extended Tool Life with Fewer Tool Changes
• Reduction in Spindle Bearing Wear
• Each Techniks Tool is Individually Lab Certified for Accuracy and Balance

DNA 20 6mm - 5mm Collet

5/8 inch Thread-Lok Ferrule

5/8 inch Thread-Lok Ferrule Review

5/8 inch Thread-Lok Ferrule Feature

• quickly and easily create your own turning tools
• patented threaded taper design
• unique thread locking mechanism creates an amazingly strong join between handle and tool
• should the ferrule loosen, simply give it a twist to lock it onto the handle again
• nothing else like it on the market

Do you have any old gouges lying around but don't use them as they don't feel right in your hand or the handle is cracked or broken? Do you have the ability to turn your own tool handles, but not sure how to connect them with the tool? This ingenious product could be the answer to your prayers. It provides a simple and effective way of connecting your turning tools to a home turned handle. The only expertise required to use these ferrules is to turn a taper and drill a hole down the centre of the handle. There is nothing else like this on the market! Don't let those old gouges sit around and get rusty any longer. Start making your one-of-a-kind just-how-you-like-them tools today. A template is included for turning the taper. NOTE: The 5/8" size refers to the through hole in the ferrule and is designed for 5/8" diameter tools.

JET BP-1248N Box and Pan Brake Floor Model

JET BP-1248N Box and Pan Brake Floor Model Review

JET BP-1248N Box and Pan Brake Floor Model Feature

• FLOOR MODEL BOX AND PAN BRAKES
• Wide assortment of finger widths allow greater versatility in the shop
• All body sections are welded steel plate with heavy truss rods and braces designed to give greater strength and durability
• Both the bed and apron are bored in line to assure the utmost accuracy

Item is on backorder until mid-January.

Techniks 04545-7/32 ER 25 Steel Sealed Coolant Size 7/32"

Techniks 04545-7/32 ER 25 Steel Sealed Coolant Size 7/32" Review

Techniks 04545-7/32 ER 25 Steel Sealed Coolant Size 7/32" Feature

• Reduced T. I. R. (tool runout)
• Increase in Holding Power
• Extended Tool Life with Fewer Tool Changes
• Reduction in Spindle Bearing Wear
• Each Techniks Tool is Individually Lab Certified for Accuracy and Balance

ER 25 Steel Sealed Clnt. size 7/32"

1-1/4" x 8 TPI Insert

1-1/4" x 8 TPI Insert Review

1-1/4" x 8 TPI Insert Feature

• 1-1/4" x 8 TPI
• Fits WoodRiver Turning Chuck

This threaded insert will fit the WoodRiver Turning Chuck. This insert will allow the same chuck to be used on lathes with different thread patterns.

POWERTEC Wood Lathe Chisel, Bead Scraper, HSS Blade 3/8 " x 1/2 " x 5-1/2 " - New

POWERTEC Wood Lathe Chisel, Bead Scraper, HSS Blade 3/8 " x 1/2 " x 5-1/2 " - New Review

POWERTEC Wood Lathe Chisel, Bead Scraper, HSS Blade 3/8 " x 1/2 " x 5-1/2 " - New Feature

• Blade Dimension: 3/8" x 1/2" x 5-1/2"
• Handle Length: 10"
• Overall Size: 10-1/2"
• High Speed Steel Blade

Wood Lathe Chisel, Bead Scraper, HSS Blade 3/8 " x 1/2 " x 5-1/2 " - New

Techniks 04240-3/16 ER 40 Collet for 3/16" Tool Shank

Techniks 04240-3/16 ER 40 Collet for 3/16" Tool Shank Review

Techniks 04240-3/16 ER 40 Collet for 3/16" Tool Shank Feature

• Reduced T. I. R. (tool runout)
• Increase in Holding Power
• Extended Tool Life with Fewer Tool Changes
• Reduction in Spindle Bearing Wear
• Each Techniks Tool is Individually Lab Certified for Accuracy and Balance

ER40 Collet, fits 3/16" tool shank

Techniks 39.05.071.015 BT 40 Shrink Fit 3/4" x 90mm

Techniks 39.05.071.015 BT 40 Shrink Fit 3/4" x 90mm Review

Techniks 39.05.071.015 BT 40 Shrink Fit 3/4" x 90mm Feature

• Reduced T. I. R. (tool runout)
• Increase in Holding Power
• Extended Tool Life with Fewer Tool Changes
• Reduction in Spindle Bearing Wear
• Each Techniks Tool is Individually Lab Certified for Accuracy and Balance

BT 40 Shrink Fit 3/4" x 90mm

Techniks D 85.90.3CT.402N Rough Head-85mm -90 degree

Techniks D 85.90.3CT.402N Rough Head-85mm -90 degree Review

Techniks D 85.90.3CT.402N Rough Head-85mm -90 degree Feature

• Reduced T. I. R. (tool runout)
• Increase in Holding Power
• Extended Tool Life with Fewer Tool Changes
• Reduction in Spindle Bearing Wear
• Each Techniks Tool is Individually Lab Certified for Accuracy and Balance

Rough Head-85mm-90?

Robert Sorby #RS202 RS2000 Main Handle

Robert Sorby #RS202 RS2000 Main Handle Review

Extra main handle for Sorby's RS2000 Hollowing System. All steel handle with rubber grip. Made in England.

Techniks I402.CCMT 432 PVD CCMT 432 TiN coated

Techniks I402.CCMT 432 PVD CCMT 432 TiN coated Review

Techniks I402.CCMT 432 PVD CCMT 432 TiN coated Feature

• Reduced T. I. R. (tool runout)
• Increase in Holding Power
• Extended Tool Life with Fewer Tool Changes
• Reduction in Spindle Bearing Wear
• Each Techniks Tool is Individually Lab Certified for Accuracy and Balance

CCMT 432 TiN coated

Techniks 1132.0500 DNA 32 5mm - 4.5mm Collet

Techniks 1132.0500 DNA 32 5mm - 4.5mm Collet Review

Techniks 1132.0500 DNA 32 5mm - 4.5mm Collet Feature

• Reduced T. I. R. (tool runout)
• Increase in Holding Power
• Extended Tool Life with Fewer Tool Changes
• Reduction in Spindle Bearing Wear
• Each Techniks Tool is Individually Lab Certified for Accuracy and Balance

DNA 32 5mm - 4.5mm Collet